No products
Home
Manufacturers
New products
-
Bending Matrix BM_50_46 – Two 86° Grooves 25mm & 16mm (Variant B) | Silver Class
BM_50_46 (Variant B) — two-groove 86° bending matrix, 50mm body, 46mm...
-
Bending Matrix BM_60_50 – Single 85° Groove 48mm Wide Body | Silver Class
BM_60_50 — wide-body single-groove 85° bending matrix, 60mm body,...
-
Bending Matrix BM_51_46 – Single 86° Groove 40mm | Silver Class
BM_51_46 — single-groove 86° bending matrix, 51mm body, 46mm height,...
-
Bending Matrix BM_50_46 – Two 86° Grooves 6mm & 32mm (Variant A) | Silver Class
BM_50_46 (Variant A) — two-groove 86° bending matrix, 50mm body, 46mm...
-
Bending Matrix BM_60_60 – 4-Way Rotatable 85° Four Grooves | Silver Class
BM_60_60 — 60mm body 4-way rotatable bending matrix, four 85° grooves...
-
Bending Matrix BM_47_46 – Two 30° Acute Grooves 8mm & 12mm | Silver Class
BM_47_46 — compact two-groove 30° acute bending matrix, 47mm body,...
-
EU4414-MAX Gooseneck Punch 86° – 150mm Working Height B56mm | Silver Class
EU4414-MAX — 150mm working height gooseneck punch, 56mm deep-relief...
-
EU4414 Gooseneck Punch 86° – 130mm Working Height B56mm | Silver Class
EU4414 — 130mm working height gooseneck punch, 56mm deep-relief body,...
Suppliers
- UAE Branch | TFICO
Viewed products
-
EU3216 Straight Punch...
EU3216 — 97mm working height...
EU3216 Straight Punch 86° – 97mm Working Height B27mm | Silver Class
BPS_97_27_86
New product
EU3216 — 97mm working height compact straight punch, 27mm body, 86° angle. Silver Class. The shortest punch in the TFI range — specified for restricted daylight clearance and short-stroke high-frequency bending across the UAE and GCC.
More info
Technical Specifications
| Punch Height (H) | 97.00 mm |
| Body Thickness (B) | 27.00 mm |
| Bending Angle | 86.00° |
| Material Grade | 42CrMo4 |
| Tolerance Class | DIN 7168 Fine |
| Standard Set Length | 835 mm |
| Segment Composition | 5×150mm + 2×42.5mm |
| Product Grade | Silver Class |
| EU Drawing Reference | EU3216 |
Clamp System Compatibility
- AFH / Euro Style — AMADA™, Bystronic™, Durma™, Ermaksan™, and most Euro-clamp CNC press brakes
- AMADA™ Direct-Mount — AMADA™ native clamp systems
Parameters Confirmed Upon Order
The following parameters are customer-defined. TFI Co. will confirm these via email upon receipt of order:
- Tip Radius (R): Standard options: 0.6 mm / 0.8 mm / 1 mm. Custom radius available on request.
- Segment Composition: Standard configuration: 5×150mm + 2×42.5mm. Custom segment arrangement available at no extra cost.
TFI Co. provides these technical specifications as a reference only. TFI Co. accepts no liability if a third-party manufacturer applies these specifications and is unable to achieve equivalent product quality. The manufacturing outcomes of any external production facility are entirely beyond TFI Co.’s control and responsibility.
The shortest punch in the TFI straight punch range — 97 mm working height with a 27 mm body width, the only standard punch in this catalogue with a 27 mm body. The reduced height limits deflection in high-frequency short-stroke applications and is specified where press brake daylight clearance is restricted. The 27 mm body provides slightly increased lateral stiffness compared to the 26 mm series. An effective secondary punch for stage bending operations, compact press brake setups, and applications where a lower working height improves control over the bending sequence.
TFI Co. provides precision press brake tooling for the metalworking industry, manufactured from 42CrMo (Chromium-Molybdenum Steel) — hard, precision-ground, and well-tested for multi-stage bending and box-forming applications. Precision-hardened to 52 HRC, all body thickness dimensions conform to DIN 7168 tolerance standards.
Available for immediate delivery across the UAE (Abu Dhabi, Dubai, Sharjah, Ajman, Ras Al Khaimah), the Kingdom of Saudi Arabia, Oman, and Qatar from TFI Co. logistics centres. All punch segment sets include one left ear and one right ear piece.
All tools come with a maximum tonnage capacity. TFI Co. strongly advises all customers to stay within the rated capacity for staff safety, and to only apply the stated maximum force — not more.